communications components key features ? case grounded hermetic five-pin to-46 coaxial package ? separate pin and tia bias inputs, allowing optimization of operating points and noise immunity ? -40 to +85c operating temperature range with -26 dbm typical sensitivity the jdsu rxp m dpgx 087 xx-000 single-mode fiber pigtail receiver product series incorporates a hermetically sealed to-46 header in which a transimpedance amplifier (tia) and pin photodiode are mounted. this receiver is designed for long wavelength, fiber optic data links operating up to 2.5 gbps. the rxp m dpgx 087 xx-000 series receivers are assembled in a rugged coaxial fiber pigtail package, with a choice of connector type. standard choices for connector type fc/sc/lc with spc/apc end faces are available. applications ? passive optical networks and fttx applications - ge-pon ? access and metro networks - sonet oc-48 sr-1, ir-1, ir-2 receivers compliance ? telcordia qualified, ingaas pin 2.5 gbps pin/tia fiber pigtail receiver north america : 800 498-jdsu (5378) website : www.jdsu.com worldwide : +800 5378-jdsu
dimensions diagram 2 2.5 gbps pin/tia fiber pigtail receiver (specifications in mm unless otherwise noted. ) standard, sc/apc connector without bracket, sc/apc connector electrical schematics pinout pin symbol description 1 vr pd bias 2 out- negative output 3 out+ positive output 4 vcc tia bias 5 gnd case ground note: compared with other pins, pin #1 has been shorted by 2 mm for orientation.
3 2.5 gbps pin/tia fiber pigtail receiver absolute maximum ratings parameter rating storage temperature -40 to +85c operating case temperature (t op ) -40 to +85c esd threshold (hbm) 300 v maximum incident optical power +6 dbm note: all specifications are at t op = 25c unless otherwise stated specifications parameter conditions minimum typical maximum pd reverse bias voltage 1.8 v 2.5 v 5.0 v modulation bandwidth (-3 db) pin = -20 dbm, ref=200 mhz, 1.8 ghz 2.0 ghz - single-ended, t op =-40 to +85c tia supply voltage 3.0 v 3.3 v 3.6 v tia supply current v cc =3.3 v, t op =-40 to +85c - 44 ma 59 ma ac transimpedance pin = -30 dbm, f=1.2 ghz, single-ended. 1.15 k 1.80 k 2.35 k dark current v pd =-5 v i dark - 10 na output impedance 40 50 60 sensitivity 2.488 gbps, nrz, prbs=2 23-1 , ber=10 -10 , - -26 dbm -22.5 dbm t op =-40 to +85c, er >10 db at 1550 nm responsivity t op =-40 to +85c, at 1550 nm - 0.88 a/w - overload 2.488 gbps, nrz, prbs=2 23-1 , ber=10 -10 , 0 dbm - - t op =-40 to +85c optical insertion loss for connector - - 0.5 db optical return loss - - -30 db note: all specifications are at t op = 25c and beginning of life unless otherwise stated electrostatic discharge (esd) esd protection is imperative. use of grounding straps, antistatic mats, and other standard esd protective equipment is required when handling or testing a junction photo diode. fiber pigtail should be handled with less than 10 n pull and with bending radius greater than one inch. soldering temperature of the leads should not exceed 260c for more than 10 seconds.
north america : 800 498-jdsu (5378) website : www.jdsu.com worldwide : +800 5378-jdsu ordering information for more information on this or other products and their availability, please contact your local jdsu account manager or jdsu directly at 1-800-498-jdsu (5378) in north america and +800-5378-jdsu worldwide, or via e-mail at customer.service@jdsu.com. 2.5 gbps pin/tia fiber pigtail receiver sample: rxp m dpg1 087 00 - 000 code package 00 wi t hou t bra c k et 01 wi t h mb14 bra c k et rxp m dpg product specifications and descriptions in this document subject to change without notice. ? 2009 jds uniphase corporation 301 62697 000 0309 rxpmdpgx087.ds.cc.ae march 2009 telcordia is a registered trademark of telcordia technologies incorporated. -000 087 code connector 0 sc /a pc -bw 1f c / spc c o nnet or 2 sc / spc c o nnet or 3l c / spc c o nnet or 4f c /a pc c o nnet or 5 sc /a pc c o nnet or 6l c /a pc c o nnet or
|
